logo-new.JPG (25331 bytes)
  

 

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

 

 

 

 

 

 

 

 

 

 

 

 

Peacock Dial Thickness Gauges

 

Peacock Dial Thickness Gauges

Labtek is the authorized North American dealer/distributor of Peacock Dial & Digital Indicators, Gauges and Calipers.  All Peacock products conform to ISO specifications and are tested to provide the highest quality and accuracy available.  Labtek also offers Peacock accessories such as contact points, color caps, and replacement parts (repair service is available).

NOTE:  Not all gauge models are depicted below.   For more information on a product or to request a price quote, please contact us by phone at 877-837-7260 (toll free) or 408-871-7700, fax 408-871-7800, or email us at labtekdiv@labtek.net.

G.jpg (5801 bytes)    G-2.jpg (5836 bytes)   G-3.jpg (5475 bytes)   G-4.jpg (5949 bytes)
Dial Thickness Gauges (0.01mm)
  • These thickness gauges are especially handy for measuring thicknesses of small parts, metal, rubber, vinyl, paper, foil and other sheet material.
  • The objects to be measured are clamped by simple lever operation.
  • The measured values are read directly on the dial gauge.
  • Since the anvil and the contract point are adjusted for parallelism, accurate measured values are obtained.
MODEL GRADUATION & RANGE THROAT DEPTH CONTACT POINT MEASURING FORCE LESS THAN (N)
DIA. PARALLELISM
G 0.01mm - 0~10mm 20mm 10mm 5 µm 1.8
G-MT 0.01mm - 0~10mm 20mm 10mm (metal) 5 µm 1.8
G-1A 0.01mm - 0~10mm 20mm 5mm 5 µm 1.8
G-1M 0.01mm - 0~10mm 20mm 6mm 5 µm 1.8
G-2 0.01mm - 0~20mm 33mm 10mm 5 µm 2.0
G-3 0.01mm - 30mm 20mm 10mm 5 µm 1.8
G-4 0.01mm - 65mm 30mm Ball tip -- 1.8
 

H.jpg (6943 bytes)        H-3.jpg (6736 bytes)
H 0.01mm - 0~10mm 120mm 10mm 5 µm 1.8
H-MT 0.01mm - 0~10mm 120mm 10mm (metal) 5 µm 1.8
H-1A 0.01mm - 0~10mm 120mm 5mm 5 µm 1.8
Bottle Wall Thickness Gauges
H-2 0.01mm - 0~10mm 170mm Spherical -- 1.8
H-3 0.01mm - 0~10mm 170mm Sperical -- 1.8
 

Q-1.jpg (6880 bytes)
Dial Swift Gauge
  • The dial swift gauge is used for the same purposes as an ordinary micrometer to measure outside sizes.
  • The spindle is always pulled upward by the force of the spring and the knob at the top is pushed down to clamp the object.
MODEL GRADUATION & RANGE THROAT DEPTH CONTACT POINT ACCURACY
DIA. PARALLELISM
Q-1 0.05mm - 0~25mm 30mm 5.5mm 10 µm 100 µm
 

G-6C.jpg (7362 bytes)   G-7C.jpg (7970 bytes)
Dial Thickness Gauges, Temperature Resistant (0.001mm)
  • Newly developed special frame minimizes inspecting errors resulting from thermal changes.
  • Zero reference point will remain accurate even after many hours of use or extreme swings in temperature.
MODEL GRADUATION & RANGE THROAT DEPTH CONTACT POINT MEASURING FORCE LESS THAN (N)
DIA. PARALLELISM
G-6C 0.001mm - 0~1mm 20mm 5mm 3 µm 1.8
G-7C 0.001mm - 0~5mm 20mm 5mm 3 µm 1.8

 

J-A.jpg (6297 bytes)         J-B.jpg (6146 bytes)
Dial Thickness Gauges (Large Type)
  • These large thickness gauges have extended throat depth to measure at the center of wide sheets.
MODEL GRADUATION & RANGE THROAT DEPTH CONTACT POINT MEASURING FORCE LESS THAN (N)
DIA. PARALLELISM
J-A 0.01mm - 0~20mm 150mm 10mm 5 µm 1.8
J-B 0.05mm - 0~35mm 140mm 20mm 5 µm 2.0
 

HR-1.jpg (7174 bytes)
Dial Thickness Gauge (Roller Type)
  • Special gauge that measures by horizontally sliding an object between two rollers.
  • Convenient way to continuously measure the thickness of thin objects such as paper, rubber and film.
MODEL GRADUATION & RANGE THROAT DEPTH ROLLER CONTACT POINT MEASURING FORCE LESS THAN (N)
OD & WIDTH PARALLELISM
HR-1 0.01mm - 0~15mm 70mm 22mm - 7mm 10 µm 2.0
 

         

    

Dial Sheet Gauges (0.01mm & 0.05mm)
  • Sheet gauges can measure wide sheets since the throat depth is 300mm, 500mm, respectively.
MODEL GRADUATION & RANGE THROAT DEPTH CONTACT POINT MEASURING FORCE LESS THAN (N)
DIA. PARALLELISM
K-1 0.01mm - 0~20mm 300mm 10mm 10 µm 2.0
K-2 0.05mm - 0~35mm 300mm 20mm 25 µm 2.0
K-3 0.01mm - 0~20mm 500mm 10mm 10 µm 3.0
K-4 0.05mm - 0~50mm 500mm 25mm 25 µm 3.0
 

P-1.jpg (5046 bytes)     P-2.jpg (7027 bytes)    P-3.jpg (7057 bytes)
Dial Pipe Gauges
  • Special gauges for measuring wall thickness of pipes and the width of curved wood.
MODEL GRADUATION & RANGE PIPE SIZE MEASURABLE MEASURING FORCE LESS THAN (N)
MIN. BORE (D) MAX. WALL THICKNESS (T) DEPTH (L)
P-1 0.01mm - 10mm 2.5mm 10mm 10mm 1.8
P-2 0.01mm - 15mm 5.1mm 15mm 50mm 1.8
P-3 0.01mm - 15mm 9.0mm 15mm 50mm 1.8
 

GL.jpg (6082 bytes)
Dial Lens Gauges
  • The dial lens gauge can measure convex, concave, convexo-concave and any other lenses in the same gauge by replacing the two contact points and the anvil.
MODEL GRADUATION & RANGE THROAT DEPTH MAX. LENS DIA. MEASURABLE MAX. LENS THICKNESS MEASURABLE MEASURING FORCE LESS THAN (N)
GL 0.01mm - 10mm 30mm ø 59MM 20mm 1.8
 

R1-A.jpg (5431 bytes)            

Dial Upright Gauges
(R Series)
  • Best suited for measuring precision parts and testing materials like rubber, leather, fabric & plastic.
  • Can be made to comply with JIS by attaching exact weights that create the specific pressures needed to measure different materials.
MODEL GRADUATION & RANGE GAUGE INSTALLED MEASURING DEPTH EFFECTIVE MEASURING RANGE MEASURING FORCE LESS THAN (N)
R1-A 0.001mm - 2mm 25F-RE 55mm 10mm 1.5
R1-B 0.01mm - 10mm 107F-RE 55mm 25mm 1.4
R1-C 0.01mm - 20mm 207F-PL 55mm 20mm 2.0
 

EG-1.jpg (6504 bytes)       EG-2.jpg (7768 bytes)
Snap Calipers
  • Easy measurement of thickness, outer &  inner diameter, and depth.
  • Handy size and excellent functions.
  • Minimum reading:  0.1mm
MODEL GRADUATION THICKNESS MEASUREMENT INNER DIA. MEASUREMENT DEPTH MEASUREMENT USE
EG-1 0.01mm 0-20mm 3-23mm -- Inner & outer dia. & thickness
EG-2 0.01mm 0-20mm 3-23mm 0-20mm Inner & outer dia., thickness, & depth
 

PS-1.jpg (7320 bytes)
Pearl Scale
  • Handy in size, the Pearl Scale is compact and light.
  • Easy measurement of size or thickness of an object.
  • Just hold object between the contact point and anvil and press knob lightly with your finger.
  • A division scale shows 0.1mm, and can measure up to 20mm.
MODEL GRADUATION RANGE
PS-1 0.1mm 20mm

 

[Home]  [Microscopes]  [Illumination]   [Video & Lenses]  [Measuring]
[Services]  [Vendor List]  [Specials]

 

Copyright © 2010, Terran Technology, Inc.; Labtek Division
Last modified: November 06, 2012